M2QA series three-phase asynchronous motor with the motor for mechanical equipment is the latest generation of ship ABB Motor Company in the M2000 series, the shell is made of high strength cast iron, in order to avoid killing two. Through the special design and manufacture, has the advantages of high efficiency, the advantages of starting torque, suitable for driving various machines, ships such as a variety of other equipment required by the pump, ventilator, separator, hydraulic machinery, auxiliary equipment and similar ship. In strict accordance with the national standard GB755 "motor rotating motor rating and performance" and "rules for the construction of ZC steel ships" design, and by the National Ship Inspection Bureau approval, obtain the China Classification Society (CCS) type approval certificate. At the same time with ABS, BV, DNV, GL, IEC, KR, LR, NK and other international standards and the rules of classification society.
1, the motor in accordance with the following criteria
The International Electrotechnical Commission IEC34, IEC72
Australian standard AS1359-2
The British standard BS4999-5000
German standard DIN42673
In accordance with the "CE" marking requirements
The motor (IDT IEC 60034-1) with GB755, GB10069 (NEQ IEC 60034-9), Q/JBQS28
2, the superior performance of the motor
Low noise and low vibration
By optimizing the design and process of M2QA-H series motor has been greatly reduced and reached the international advanced level in noise and vibration.
The high level of protection performance
The standard design of motor protection class is IP55, can provide higher levels of protection are required according to customer requirements.
With the wide application of voltage
Motor design considering the voltage change in different regions, to adapt to the use of multiple motor areas, and ensure user performance.
To improve the insulation level, increase the service life of the motor
The standard motor adopts F class insulation structure, thereby improving the service life of the motor, increase the reliability of the electric motor.
high efficiency
The optimization design of motor, with high efficiency, can produce considerable energy saving.
3, drive
The available motor pulley, gear or elastic coupling transmission.
4, impregnation and surface treatment
The surface of the motor windings and metal parts are in accordance with the requirements of motor performance after heat, special varnish and has good moisture-proof, anti mildew and anti salt fog.
Conditions of use: elevation of 0M
Ring in the -25 temperature -50 DEG C
Relative humidity: less than 95%
Condensation:
Salt fog:
Oil mist:
Mould:
Impact:
Vibration:
Tilt: 22.5 degrees
Swing:
Voltage, frequency and mode
380V (50HZ)
440V (60HZ)
Working mode: continuous (S1)
Bearing: Japan NSK bearings
If the user needs a specific working voltage, can be supplied according to special requirements.
詩恩斯電氣
